Pallet preparation,
layer after layer.
Lifting cases, turning, stacking them on the pallet, bending down for the bottom layer: it is the most tiring end-of-line job and one of the first to go unstaffed. A humanoid robot does it with light cases, following the pallet pattern, night shift included.
Four motions, repeated the whole shift.
- 01
It picks the case
From the belt, the roller conveyor or the accumulation point after case packing.
- 02
It carries it to the pallet
A humanoid on a mobile base moves between the line and the pallet without dedicated paths.
- 03
It stacks it to the pattern
Position and orientation of every case, layer after layer, to the pallet pattern.
- 04
The pallet is ready
Once complete it goes on to wrapping and shipping; the robot starts again on an empty pallet.
You don't buy the robot. You pay for the hours.
The fee starts at €4,000 a month, all included. What an hour costs depends on how many hours the robot works on your line.
| Coverage | Hours a year | Fee from €4,000/month | Typical €5,500/month |
|---|---|---|---|
| 1 shift | 1,800 | €27/h | €37/h |
| 2 shifts | 3,600 | €13/h | €18/h |
| 24/7 | 6,000 | €8/h | €11/h |
At the entry fee a robot hour costs less than an hour of human work from a single shift; the more hours it works, the less it costs.
At the typical fee, on 1 shift a robot hour costs more than an hour of human work: the service pays off when the robot works several shifts.
All-inclusive fee (robot, deployment, training, monitoring, maintenance, replacement) divided by the useful working hours in a year: 1 shift ≈ 1,800 h, 2 shifts ≈ 3,600 h, 24/7 up to 6,000 h. Indicative figures, verified case by case in the assessment.
Your numbers first, then the robot.
The assessment is free and without obligation: at the end you know whether the job is feasible, with which robot and how many hours it covers.
- 01
Case weight
In the end-of-line scenario we use as a reference, the payload per unit is up to 10–15 kg; the real limit depends on the robot chosen and we check it on your cases.
- 02
Pallet patterns
How many patterns and pallet heights: each pattern becomes one of the robot's processes.
- 03
Space and paths
Distance between line and pallet, where empty pallets arrive and where full ones leave.
- 04
Case rate
How many cases an hour reach the end of the line, and whether the same robot can do the case packing too.
- 05
Area safety
Risk assessment of the station and coexistence with forklifts and people, under the applicable standards.
You don't always need a humanoid.
Humanoid robot as a service
- Light cases and lines with several formats
- The same robot also does the case packing
- No cell to install
- A monthly fee, no capital outlay
Palletiser (cobot or industrial robot)
- Heavy cases
- High volumes on fixed patterns
- A dedicated, fenced or guarded station
Pallet preparation, in brief.
Can a humanoid robot palletise?
Yes, with light cases: it stacks them to the pallet pattern, layer after layer. For heavy cases or high volumes on fixed patterns a dedicated palletiser is still the better fit. The limit depends on the robot chosen and we check it on your cases.
How much does a palletising robot cost?
With Bender you don't buy the robot: you pay a monthly fee from €4,000, all included. With a typical configuration one working hour costs about €11 on 24/7 coverage and about €18 on two shifts; on a single shift it costs more than an hour of human work, and we say so.
Does the pallet area need fencing?
It depends on the risk assessment of the station and on the robot. We carry it out with you before deployment; the reference standards are in our guide to risks and safety.
What work would you give to a robot?
Tell us the task, the environment, the hours you need covered and the result you expect. We'll assess the use case and identify the right robotic worker.